Manufacturing Area's
 
Parameters Technical Details/Specifications

Thickness (mm)

0.10 to 4.00

Width (mm) - Sahibabad Plant

10 to 1700 (Max)

Width (mm) - Odisha Plant

10 to 1350 (Max)

Width (mm) - Khopoli Plant

10 to 1250 (Max)

Coil Weight (MT)

Up to 30 MT (7 to 18 kg/mm width)

Surface Finish

Super Bright, Bright, Dull & Matte. (RaValue with controlled Rmax on request).

Grades

Specifications - As per JIS/BIS/ ASTM/EN Standards
Low Carbon CRCA Grades
Super EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High
Strength steel(IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42,
ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion
Resistant Steel, viz., Tin Mill Black Plate (TMBP)
Medium & High Carbon CRCA Grades
C- 30, C-40,MC -ll,EN - 8, for spring steel application, C-55,MC-12,
EN- 9 C-62,C-60, C-80,HC-14,EN-42J
  ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel
  OTHER CRCA Grades
Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012
Through Hardening Grades- SAE 1040, SAE 1045, 1055, 1065, 1080, 1541
   
H.R PICKLED/ SKIN PASSED & OILED

Thickness

  • Up to 3.00 mm
  • 3.00 mm - 4.00 mm
  •  
  • Above 4.00 mm
  • Max. Width for Cut Size

  • 1500 mm
  •  
  • 1250  mm
  • 600 mm
  •  

    Width for Coil

  • 50 mm - 1700 mm
  •      
  • 50 mm - 1700 mm
  •    
  • 50 mm - 1700 mm
  • COLD ROLLED STEEL SHEETS :

     
    Parameters Technical Details/Specifications
       

    Thickness (mm)

    0.10 t0 4.00

    Width (mm) - Sahibabad Plant

    10 to 1700 (Max)

    Width (mm) - Odisha Plant

    10 to 1350 (Max)

    Width (mm) - Khopoli Plant

    10 to 1250 (Max)

    Cut- to -Length (mm)

    Up to 4500mm with tolerance of +2/-0 mm(Further close tolerance
    on - request)

    Coil Weight (MT)

    Up to 30 MT (7 to 18 kg/mm width)

    Surface Finish

    Super Bright, Bright, Dull & Matte. (RaValuewith controlled Rmax on request).

    Grades

    Specifications - As per JIS/BIS/ ASTM/EN Standards
    Low Carbon CRCA Grades
    Super EDD/EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High
    Strength steel (IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42,
    ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion
    Resistant Steel, viz., Tin Mill Black Plate (TMBP)
    Medium & High Carbon CRCA Grades
    C- 30, C-40,MC -ll, EN - 8, C-55, MC-12,
    EN- 9 C-62, C-60, C-80, HC-14, EN-42J
      ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel
      OTHER CRCA Grades
    Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012
    Through Hardening Grades- SAE 1040, SAE 1045, 1055, 1065, 1080, 1541
     
    H.R PICKLED/ SKIN PASSED & OILED

    Thickness

    Up to 3.00 mm      3.00 mm - 4.00 mm           Above 4.00 mm

    Max. Width for Cut Size

    1500 mm           1250 mm                          600 mm  

    Width for Coil

    50 mm - 1700 mm      50 mm - 1700 mm       50 mm - 1700 mm
     
     

    PROCESS ROUTE OF CRCA MATERIAL