|
|
|
| |
Products > Cold Rolled |
|
| |
|
|
| |
Cold Rolled Coil |
|
| |
Cold Rolled Sheet |
|
| |
|
|
| |
|
|
| |
COLD ROLLED STEEL COILS |
|
| |
|
|
| |
S.no |
Parameters |
Technical details/specifications |
1. |
Thickness(nun) |
0.10t04.00 |
2.
|
Width(mm) |
10to 1700(Max) |
3. |
CoilWeight(MT) |
Up to 30 MT (7 to 18 kg/mm width) |
4. |
Surface Finish |
Super Bright, Bright, Dull&Matte. (RaValuewith controlled Rmax on request). |
5. |
Grades |
Specifications - As per JIS/BIS/ ASTM/EN Standards
|
Low Carbon CRCA Grades
Super EDD/EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High
Strength steel(IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42,
ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion
Resistant Steel, viz., Tin Mill Black Plate (TMBP) |
Medium &High Carbon CRCA Grades
C- 30, C-40,MC -ll,EN - 8, for spring steel application, C-55, MC-12,
EN- 9 C-62,C-60, C-80,HC-14,EN-42J |
6. |
Strip widths mm |
ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel |
7. |
Chemical composition (Coating) |
OTHER CRCA Grades
Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012
Through Hardening Grades- SAE 1040,SAE 1045, 1055, 1065, 1080, 1541 |
|
H.R PICKLED/ SKIN PASSED & OILED |
8. |
Thickness |
Up to 3.00 mm 3.00 mm - 4.00 mm Above 4.00 mm |
9. |
Max. Width for Cut Size |
1500 mm 1250 mm 600 mm |
10. |
Width for Coil |
50 mm - 1700 mm 50 mm - 1700 mm 50 mm - 1700 mm |
|
|
| |
|
|
| |
|
|
| |
COLD ROLLED STEEL SHEETS |
|
| |
|
|
| |
S.no |
Parameters |
Technical details/specifications |
1. |
Thickness(nun) |
0.10t04.00 |
2. |
Width(mm) |
10to 1700(Max) |
3. |
Cut- to -Length (mm) |
Up to4500mm with tolerance of +2/-0 mm(Further close tolerance onrequest) |
4. |
CoilWeight(MT) |
Up to 30 MT (7 to 18 kg/mm width) |
5. |
Surface Finish |
Super Bright, Bright, Dull&Matte. (RaValuewith controlled Rmax on request). |
6. |
Grades |
Specifications - As per JIS/BIS/ ASTM/EN Standards
|
Low Carbon CRCA Grades
Super EDD/EDD/DD/D (SPCX, SPCEN, SPCD, SPCC) non-aging, IF-High
Strength steel(IF-HSS), High Strength Low Alloy Steel (HSLA), viz., ST -42,
ST-45, ST-52, SAPH-400/41O, Steel for Porcelein Enammeling, Corrosion
Resistant Steel, viz., Tin Mill Black Plate (TMBP) |
Medium &High Carbon CRCA Grades
C- 30, C-40,MC -ll,EN - 8, for spring steel application, C-55, MC-12,
EN- 9 C-62,C-60, C-80,HC-14,EN-42J |
7. |
Strip widths mm |
ELECTRICAL Grades Elec -I, Elec-n, Elec-nI, SemiProcessed Elect. Steel |
8. |
Chemical composition (Coating) |
OTHER CRCA Grades
Case Hardening Steel- 15Cr3, SAE 1010, SAE 1012
Through Hardening Grades- SAE 1040,SAE 1045, 1055, 1065, 1080, 1541 |
| |
H.R PICKLED/ SKIN PASSED & OILED |
9. |
Thickness |
Up to 3.00 mm 3.00 mm - 4.00 mm Above 4.00 mm |
10. |
Max. Width for Cut Size |
1500 mm 1250 mm 600 mm |
11. |
Width for Coil |
50 mm - 1700 mm 50 mm - 1700 mm 50 mm - 1700 mm |
|
|
| |
|
|
| |
|
|
| |
PROCESS ROUTE OF CRCA MATERIAL |
|
|
| |
|
|
| |
|
|
| |
|
|
|
| |
|
|
|
|
|
|
